A Dremel is actually an American brand name that is known for its rotary tools. Oftentimes the term “dremel” is used colloquially to refer rotary tools even if it’s of other brands. Dremel is the most famous company that manufactures rotary tools but if you are interested in knowing other brands check out the top six alternatives for dremel in this link https://drilling-it.com/best-dremel-alternative-reviews/.
Basically, a rotary tool is a handheld power tool with a rotating tip that can be attached to a variety of tools and accessories to serve diverse uses. A dremel rotary tool can be used on wood, metal, glass. Electronics, plastics and many other types of materials. This tool is commonly used in arts and craft making and efficient for working on small and hard-to-reach spaces.
Tools That Work Best With Dremel Rotary Tool
- Sanding Drums
A sanding drum is a cylindrical wheel with abrasive attached on its outer curved surface like sand paper used for sanding surfaces of decorative stones and carving bevels.
- Buffing or Polishing Bits
Polishing bits can be used to polish or enhance a metal part while buffing can create a reflective surface on the material.
- Carbide Bits
Carbide bits can be attached to rotary tool for carving and etching.
- Wire Wheels
It is attached to the dremel rotary tool to remove rusts from metal.
- Sharpening Wheel
Sharpening wheel can be attached to dremel tool to sharpen knives, scissors and more.
Points To Remember When Using a Rotary Tool
- Choose Your Preferred Rotary Tool.
Some of the factors that you need to consider in choosing are fixed or cordless models, portable and lightweight, battery life and fixed speed or variable speed.
- Read The Manual Before Using The Rotary Tool For The First Time.
You can attach variety of tools to your rotary tool and each has particular speed to follow. Checking the manual also makes you familiar of the proper procedures to follow while using your rotary tool.
- Wear Proper Safety Gear.
Your safety is always the most important, so remember to wear safety gloves and safety glasses especially when cutting, polishing or grinding with the tool.
- Practice Inserting The Bits.
Practice makes you more familiar with your tool but make sure it is turned off and unplugged when you practice inserting the bits.
- Choose The Right Bit For The Job.
Familiarity of the bit and its usage is an important factor of choosing the right one for the job.