Our landscaping or lawn needs regular watering, so; we are dependent on the sprinkler’s irrigation system. These irrigation systems are often worn out or get damaged. Problems like water leakage, low pressure, or water blocking might need a change of system. However, if you’re creating new landscaping, a sprinkler irrigation system is the first thing you need to have smooth and appealing landscaping. Often people try to follow DIY methods, but that doesn’t last long. So, you need to contact commercial snow removal services or landscape contractors for effective installation.
But how do you install a new system? What are the ways to change or install a new system?
Here are the six Steps or ways you or your contractor will follow to add a sprinkler irrigation system:
Organize all the installation material for sprinklers: Installing a new sprinkler irrigation system or changing the old one involves a lot of messy business. Landscape or your garden needs to disturb depending on how your plot is designed. There’s a lot of digging involved. Before you or your contractor start the process, find out all the utility lines that are on your property, contact local waterworks to know about any water flow prevention rules or any other regulations required to follow regarding irrigation systems. Organize various materials such as PVC, shovels, Poly piping fittings, black flow preventers, and other tools required in the installation process.
Measuring and Marking the job site: When you contact a utility company, they will come to your place to mark public utility on your property. Later you need to show your contractor or commercial snow plowing services provider all the wiring for drainage pipes, gas lines, exterior lights, and other utilities; they will map out all the utilities and mark them with a flag or significant symbol. Once they mark out utilities, they measure all the needed areas for sprinkler installations. Your contractor will plan out all the wiring and system, location, connections with the main water supply.
Putting pipe wires, Sprinklers, and valves in place: Once the plan is mapped out, your contractor or commercial parking lot sweeping providers that can install the system will dig in your landscape depending on the pipe requirements and sprinkler system parts. After digging up, pipelines are placed according to plan or the system, and the soil is put back into place. This part of the process is messy and needs the most care. Your contractor will use two types of pipes: PVC – which provides high flow rates, and Polyurethane Pipes – which are more flexible. They require a large dig for the main irrigation pipeline and comparatively less for other pipelines.
Connecting main water supply with Sprinkler system: Your landscaping sod installation contractor will connect the irrigation system with the main water supply based on the climate of your place. If you live in a place where the temperature can be 32°f or below, the main water connection will be in the basement so; your contractor will connect the system with the water supply using a pipe through the exterior wall. Similarly, if you live in a warm climate, your connection will be in your backyard so that they will work accordingly. Depending on your system and landscaping requirements, you will need a backwater preventer.
Putting all the controls and wiring in place: Now your system is installed and connected with the water supply, you need a few connections to start your sprinkler irrigation system. Your contractor will put all the electric connections required either outside your home or inside or backyard, depending on where it’s more suitable and convenient. All the wiring will be done in a manner to keep it away from dangerous spots as planned. All the outside wiring will be protected with extra shielding.
Wrap up the final job: Once all the wires and system are in place, your landscaping sod installation contractor will recheck all the adjustments, danger points, wiring systems. After the recheck, a trial needs to be performed to make sure it’s working properly. If you found anything missing or a sprinkler with low pressure or leakage, immediately inform your contractor, they will make the necessary adjustments and changes required. Keep in touch with your contractors and ask them what you need to do for precautions and maintain proper efficiency and effectiveness.
In conclusion, these are some of the steps and ways to be followed to the installed sprinkler irrigation system. Irrespective of who performs the task, these are the steps or ways to be followed; you cannot skip any of these tasks and destroy the irrigation system. However, installation is messy and requires experience and knowledge, so; it’s better to contact professional services to install a new system.